End of Lease

Bond Cleaning Checklist: The Full Room by Room List (2026)

Illawarra Cleaning Crew
22 July 2026
9 min read
End of Lease
Bond Cleaning
Checklist
Australia

Short answer


A bond clean must return the property to the condition recorded in the entry condition report, fair wear and tear excepted. In practice that means every room cleaned top to bottom, the oven and rangehood degreased, all bathrooms descaled and mould free, all internal windows, tracks and sills done, walls spot cleaned, and carpets professionally steam cleaned if they were carpeted at move in.



Kitchen



  • Oven, grill, trays and racks degreased inside and out

  • Rangehood filters degreased, exhaust wiped

  • Cooktop, splashback and grout scrubbed

  • Inside, outside and on top of all cupboards and drawers

  • Inside the dishwasher, including the filter and seals

  • Fridge cavity, sink, taps and drain descaled

  • Benchtops, skirting boards and floors



Bathrooms and laundry



  • Shower screens descaled, soap scum and mould removed

  • Grout, silicone and shower tracks scrubbed

  • Toilet cleaned inside, outside, behind and at the base

  • Vanity, mirrors, cabinets inside and out

  • Exhaust fan covers dusted and wiped

  • Laundry tub, behind the machine, dryer lint filter



Bedrooms and living areas



  • Wardrobes inside, shelves, rails and mirrored doors

  • Ceiling fans, light fittings and air vents dusted

  • Cobwebs removed from all corners and cornices

  • Walls spot cleaned, marks and scuffs removed

  • Skirting boards, door frames, doors and handles wiped

  • Power points and light switches wiped

  • Carpets vacuumed then professionally steam cleaned

  • Hard floors vacuumed and mopped



Windows, doors and outside



  • Internal window glass, sills and all tracks

  • External glass where safely reachable

  • Flyscreens dusted or washed

  • Blinds wiped, curtains checked as per the lease

  • Balcony, patio, garage floor swept, cobwebs removed

  • Letterbox emptied, bins cleaned out



The nine spots people lose bond over



  1. Top of ceiling fan blades

  2. Inside the dishwasher filter

  3. Sliding door and window tracks

  4. Behind and underneath the fridge and washing machine

  5. Rangehood filters

  6. Exhaust fan covers in the bathroom

  7. The seal and hinges of the oven door

  8. Skirting boards behind where furniture stood

  9. The garage floor and any oil marks



Before the final inspection


Photograph every room once the clean is finished, compare against your entry condition report, and keep receipts for carpet steam cleaning and pest control if your lease required them. If your agent raises an issue, most reputable cleaners including us will return and re-clean the disputed items free of charge.




Want the clean done for you?


We cover this entire checklist on every bond clean in Wollongong and the Illawarra, backed by a 100% bond back guarantee. See our end of lease service or book online.



Frequently asked questions

What is included in a bond cleaning checklist?

A bond clean covers the kitchen including oven and rangehood, all bathrooms and laundry, bedrooms and living areas, internal windows, tracks and sills, walls spot cleaned, skirting boards, light fittings and fans, plus floors vacuumed and mopped and carpets professionally steam cleaned where applicable.

Do I need to clean walls for a bond clean?

You need to remove marks, scuffs and adhesive residue, but you are not required to repaint or remove fair wear and tear such as minor scuffing consistent with normal living.

Do I have to steam clean carpets at the end of a lease in Australia?

If the property was carpeted and professionally cleaned at the start of your tenancy, most leases require the carpets to be professionally steam cleaned again on exit. Rules vary by state, so check your tenancy agreement and entry condition report.

What do property managers check first at a final inspection?

The oven, the shower screen and grout, window and sliding door tracks, the tops of ceiling fan blades, rangehood filters and skirting boards. These are the items most commonly missed by DIY cleans.

How long does a bond clean take?

A one bedroom unit typically takes 4 to 6 hours, a two or three bedroom home 6 to 10 hours, and a larger house a full day or more with a team. Condition affects this more than size.

Share this article

Related Articles

End of Lease

How Much Does End of Lease Cleaning Cost in Australia? (2026 Price Guide)

Typical bond cleaning prices by property size and city, what changes the price, and how hourly quotes compare to fixed-price bond cleans.

Read More
End of Lease

Move Out Cleaning Wollongong: DIY vs Professional

Should you tackle your own end of lease clean or hire a pro? We break down the time, costs, and risks to your bond.

Read More
End of Lease

Ultimate End of Lease Cleaning Checklist for Wollongong Renters

Don't lose your bond! Our comprehensive checklist covers everything property managers look for during final inspections.

Read More

Need Professional Cleaning Services?

Ready to experience the professional cleaning difference? Book our services and see why customers across Wollongong trust us with their homes and businesses.

WhatsApp